| Line 163: | Line 163: | ||
|15:55 | |15:55 | ||
|CO to -25 on cores 2,3,4,5, -20 all others | |CO to -25 on cores 2,3,4,5, -20 all others | ||
| | |MC 21328 | ||
| | SC n/a | ||
|Abort SC after 5 minutes. | |||
|} | |} | ||
Revision as of 16:13, 17 October 2021
The GIGABYTE X570 AORUS Master is an AM4 motherboard that includes support for the AMD Ryzen™ 5000 Series/ Ryzen™ 5000 G-Series/ Ryzen™ 4000 G-Series/ 3rd Gen Ryzen™/ 2nd Gen Ryzen™/ 2nd Gen Ryzen™ with Radeon™ Vega Graphics/ Ryzen™ with Radeon™ Vega Graphics Processors.
- Vendor support downloads (including BIOS updates)
- YouTube: How to Quickly Overclock with Ryzen Master (TheGrayingTech)
1 Overclocking[edit | edit source]
1.1 Terminology[edit | edit source]
| Term | Name | Definiton | Notes |
|---|---|---|---|
| PPT | Package Power Tracking | How many watts delivered to CPU socket |
|
| TDC | Thermal Design Current | Current delivered to processor during high temperature periods (i.e. 70C-90C) |
|
| EDC | Electrical Design Current | Current flowing to processor during high voltage periods, typically during all-core loads |
|
| TDP | Processors |
|---|---|
| 105w | 3800x, 3800xt, 3900x, 3900xt, 5800x, 5900x, 5950x |
| 95w | 3600x, 3600xt (can be treated as 105w) |
| 65w | 3600, 3700x, 5600G, 5700G, 5600x |
1.2 Steps[edit | edit source]
1.2.1 Disable startup items[edit | edit source]
Use the Startup tab within Taskman to snapshot the existing startup items and then disable everything.
1.2.2 Required Software[edit | edit source]
Download and install current versions of:
- Ryzen Master from AMD
- Cinebench R23 from MAXON (from File -> Settings, set Minimum Test Duration to Off)
1.2.3 Edit BIOS Settings[edit | edit source]
- XMP (aka DOCP) to Enable
- CPU Core Voltage and CPU SOC Voltage to Auto
- AMD Overclocking -> Precision Boost Overdrive to Advanced
- initial limits: PPT 395, TDC 255, EDC 200, Max CPU Boost Clock Override 0, Platform Thermal Throttle Limit Auto,
- Curve Optimizer: All cores, Neagative, 15 (15 is halfway)
- Basics also required:
- Re-Size BAR Support: Auto
- SATA Mode: RAID
1.2.4 Setting Up Ryzen Master[edit | edit source]
- Select Creator Mode (aka Default) and click Apply at the bottom.
- Enable Histograms in Settings. Make sure CCD displays are expanded
Cinebench R23 baseline
- Run multi core, then single core.
- Tune to failure, then to stable. On fail, lower magnitude by five. On success, raise by five
Set screen saver to LONG timeout!!!!
| Start Time | Settings | Result | Notes |
|---|---|---|---|
| 09:00 | CO all core -15 | MC 20691
SC 1572 |
Full run. On SC test, C 05 peaked around 4905 |
| 10:00 | CO all core -20 (checkpoint) | MC 21287
SC 1576 |
Full run. |
| 11:00 | CO all core -25 | Crash on MC test about 3 minutes in | |
| 11:12 | CO per core set all to -20 (checkpoint) | MC 21262
SC n/a |
Full run on MC. Aborted SC after 3 minutes |
| CO set to -25 on cores 0, 1, 2 | |||
| CO set to -25 on cores 6,7,8 | Some kind of fail. | ||
| CO set to -25 on cores 6,7,8 one at a time | No fails | ||
| CO set to -25 on cores 9, 10,11, -20 on all others | MC 21367
SC n/a |
Full run on MC, Aborted SC after 7 minutes | |
| 14:00 | CO set to -25 on cores 6,7,8, -20 on all others | MC 21368 | Full run on MC. Aborted SC after 5 minutes |
| 14:23 | CO set to -25 on all except cores 6,7,8 which are at -20 | MC 21401
SC FAIL |
Full run on MC, instant fail on SC |
| 14:41 | CO -25 on 0-5 cores, 20 on 6-11 | MC FAIL | |
| 15:40 | CO to -25 on cores 3,4,5, -20 all others | MC 21269
SC n/a |
Full run on MC. Abort SC after 5 minutes. |
| 15:55 | CO to -25 on cores 2,3,4,5, -20 all others | MC 21328
SC n/a |
Abort SC after 5 minutes. |
