KitsNet Operations:External Packages:Linux:MegaRAID Storage Manager: Difference between revisions

Back to version history
← Older edit
VisualWikitext
Peter A. Smode (talk | contribs)
administrator, Bureaucrats, family, kitsnet_adm, Administrators
2,612 edits
Added output of collect_lsi.sh run
Peter A. Smode (talk | contribs)
administrator, Bureaucrats, family, kitsnet_adm, Administrators
2,612 edits
Undo revision 919 by Psmode (talk)
Tags: Replaced Undo
 
Line 1: Line 1:
The MegaRAID Storage Manager package provides GUI, SNMP and CLI management access to LSI RAID controllers including the 9260 8i used on wort. The [https://www.broadcom.com/support/knowledgebase/1211161491782/megaraid-sas-9260-4i---9260-8i---9260de-8i---9261-8i-downloads Broadcom hosted MegaRAID SAS 9260-4i / 9260-8i / 9260DE-8i / 9261-8i downloads page] includes a link to the [https://www.broadcom.com/support/download-search?pg=Legacy+Products&pf=Legacy+RAID+Controllers&pn=MegaRAID+SAS+9260DE-8i&pa=&po=&dk=&pl= official downloads page] which in turn has a link to MegaRAID Storage Manager - Linux x64 ([https://docs.broadcom.com/docs/17.05.06.00_MSM_Linux-x64.zip current version 17.05.06.00]) A copy of this package has been downloaded and unpacked at http://wort/KitsNet/External_Packages/MR/MSM_linux_x64_installer-17.05.06-00.disk/
The MegaRAID Storage Manager package provides GUI, SNMP and CLI management access to LSI RAID controllers including the 9260 8i used on wort. The [https://www.broadcom.com/support/knowledgebase/1211161491782/megaraid-sas-9260-4i---9260-8i---9260de-8i---9261-8i-downloads Broadcom hosted MegaRAID SAS 9260-4i / 9260-8i / 9260DE-8i / 9261-8i downloads page] includes a link to the [https://www.broadcom.com/support/download-search?pg=Legacy+Products&pf=Legacy+RAID+Controllers&pn=MegaRAID+SAS+9260DE-8i&pa=&po=&dk=&pl= official downloads page] which in turn has a link to MegaRAID Storage Manager - Linux x64 ([https://docs.broadcom.com/docs/17.05.06.00_MSM_Linux-x64.zip current version 17.05.06.00]) A copy of this package has been downloaded and unpacked at http://wort/KitsNet/External_Packages/MR/MSM_linux_x64_installer-17.05.06-00.disk/


On the Broadcom site, the [https://docs.broadcom.com/docs/MR_SAS_SNMP_Installer_6.14-17.05.00.02.zip Latest SNMP Installers (version 17.05.02)] is also available. These appear to have been installed on wort prior to its Rocky Linux incarnation<syntaxhighlight lang="shell-session">
On the Broadcom site, the [https://docs.broadcom.com/docs/MR_SAS_SNMP_Installer_6.14-17.05.00.02.zip Latest SNMP Installers (version 17.05.02)] is also available. These appear to have been installed on wort prior to its Rocky Linux incarnation
[root@wort LSI]# ./collect_lsi.sh
***
***
*** 01/26/2024 10:34:58: storcli -v (show version of StorCLI)
***
 
      StorCli SAS Customization Utility Ver 1.23.02 Mar 28, 2017
 
    (c)Copyright 2017, AVAGO Corporation, All Rights Reserved.
 
Exit Code: 0x00
***
***
*** 01/26/2024 10:34:58: storcli -h (show StorCLI help)
***
    Storage Command Line Tool  Ver 1.23.02 Mar 28, 2017
 
    (c)Copyright 2017, AVAGO Corporation, All Rights Reserved.
 
 
storcli -v
storcli -h| -help| ?
storcli -h| -help| ? legacy
storcli show
storcli show all
storcli show ctrlcount
storcli show file=<filepath>
storcli /cx add vd r[0|1|5|6|00|10|50|60]
        [Size=<VD1_Sz>,<VD2_Sz>,..|all] [name=<VDNAME1>,..]
        drives=e:s|e:s-x|e:s-x,y,e:s-x,y,z [PDperArray=x][SED]
        [pdcache=on|off|default][pi][DimmerSwitch(ds)=default|automatic(auto)|
        none|maximum(max)|MaximumWithoutCaching(maxnocache)][WT|WB|AWB][nora|ra]
        [direct|cached] [cachevd] [Strip=<8|16|32|64|128|256|512|1024>]
        [AfterVd=X] [EmulationType=0|1|2] [Spares = [e:]s|[e:]s-x|[e:]s-x,y]
        [force][ExclusiveAccess] [Cbsize=0|1|2 Cbmode=0|1|2|3|4|7]
storcli /cx add vd each r0 [name=<VDNAME1>,..] [drives=e:s|e:s-x|e:s-x,y]
        [SED] [pdcache=on|off|default][pi] [DimmerSwitch(ds)=default|
        automatic(auto)|none|maximum(max)|MaximumWithoutCaching(maxnocache)]
        [WT|WB|AWB] [nora|ra] [direct|cached] [EmulationType=0|1|2]
        [Strip=<8|16|32|64|128|256|512|1024>] [ExclusiveAccess]
        [Cbsize=0|1|2 Cbmode=0|1|2|3|4|7]
storcli /cx add VD cachecade|nytrocache r[aid][0,1,10, 1EC]
        drives = [e:]s|[e:]s-x|[e:]s-x,y [WT|WB] [assignvds = 0,1,2]
        [BOOTVOLSIZE=x]
storcli /cx add VD cachecade|nytrocache slice r[aid][0,1]
        size=<x> [name=<NytroCacheName>] drives= [e:]s|[e:]s-x|[e:]s-x,y
        [WT|WB][assignvds = 0,1,2]
        size=[<VD1_Sz>,<VD2_Sz>,..] [name=<VDNAME1>,..] [WT|WB] [nora|ra]
        [direct|cached] [CachedBadBBU|NoCachedBadBBU]
        [Strip=<8|16|32|64|128|256|512|1024>] [AfterVd=X]
        [Spares = [e:]s|[e:]s-x|[e:]s-x,y] [force]
storcli /cx add JBOD [drives=e:s|e:s-x|e:s-x,y]
storcli /cx/ex show
storcli /cx/ex show all
storcli /cx/ex show status [extended]
storcli /cx/ex show phyerrorcounters
storcli /cx/vx del [cachecade] [discardcache] [force]
storcli /cx delete events
storcli /cx show events [[type= <sincereboot| sinceshutdown| includedeleted|
latest=x| ccincon vd=<0,1,...>] filter=<[info],[warning],[critical],[fatal]>
file=<filepath> [logfile[=filename]]
storcli /cx show eventloginfo
storcli /cx show health [all]
storcli /cx delete securitykey
storcli /cx set securitykey=xxxxxxxx {passphrase=xxxx} {keyid=xxx}
storcli /cx start Diag Duration=<Val>
storcli /cx set securitykey keyid=xxx
storcli /cx compare securitykey=xxxxxxxxxx
storcli /cx set termlog[=on|off|offthisboot]
storcli /cx show termlog [type=config|contents] [logfile[=filename]]
storcli /cx delete termlog
storcli /cx set securitykey=xxxxxxxx oldsecuritykey=xxxxxxxx
        {passphrase=xxxx} {keyid=xxx}
storcli /cx set sesmonitoring[=on|off]
storcli /cx show sesmonitoring
storcli /cx set failpdonsmarterror[=on|off]
storcli /cx show failpdonsmarterror
storcli /cx/dx show
storcli /cx/dall show cachecade
storcli /cx/dx show all
storcli /cx/dall show mirror
storcli /cx/dall split mirror
storcli /cx/dall add mirror src=<val> [force]
storcli /cx show freespace
storcli /cx/fall show [all] [securityKey = xxx]
storcli /cx/fall del|delete [securityKey = xxx]
storcli /cx/fall import [preview] [securityKey = xxx]
storcli /cx/vx set ssdcaching=on|off
storcli /cx/vx set hidden=on|off
storcli /cx/dx hideallvds
storcli /cx/dx unhideallvds
storcli /cx/dx set hidden=on|off
storcli /cx/dx set security=on
storcli /cx/vx show expansion
storcli /cx show fshinting
storcli /cx/vx set fshinting=<value>
storcli /cx/vx expand Size=<xx> [expandarray]
storcli /cx[/ex]/sx show
storcli /cx[/ex]/sx show all
storcli /cx[/ex]/sx start rebuild
storcli /cx[/ex]/sx stop rebuild
storcli /cx[/ex]/sx pause rebuild
storcli /cx[/ex]/sx resume rebuild
storcli /cx[/ex]/sx show rebuild
storcli /cx[/ex]/sx show health
storcli /cx[/ex]/sx show poh
storcli /cx[/ex]/sx show smart
storcli /cx[/ex]/sx start copyback target=e:s
storcli /cx[/ex]/sx stop copyback
storcli /cx[/ex]/sx pause copyback
storcli /cx[/ex]/sx resume copyback
storcli /cx[/ex]/sx reset phyerrorcounters
storcli /cx[/ex]/sx reset errorcounters type = 1|2
storcli /cx[/ex]/sx show copyback
storcli /cx[/ex]/sx show patrolread
storcli /cx[/ex]/sx show phyerrorcounters
storcli /cx[/ex]/sx show errorcounters
storcli /cx[/ex]/sx start initialization
storcli /cx[/ex]/sx stop initialization
storcli /cx[/ex]/sx show initialization
storcli /cx[/ex]/sx start locate
storcli /cx[/ex]/sx stop locate
storcli /cx[/ex]/sx show securitykey keyid
storcli /cx[/ex]/sx add hotsparedrive [DGs=<N|0,1,2...>] [enclaffinity]
        [nonrevertible]
storcli /cx[/ex]/sx delete hotsparedrive
storcli /cx[/ex]/sx spinup
storcli /cx[/ex]/sx spindown
storcli /cx[/ex]/sx set online
storcli /cx[/ex]/sx set offline
storcli /cx[/ex]/sx set missing
storcli /cx[/ex]/sx set jbod
storcli /cx[/ex]/sx set security=on
storcli /cx[/ex]/sx set good [force]
storcli /cx[/ex]/sx insert dg=A array=B row=C
storcli /cx/vx set emulationType=0|1|2
storcli /cx/vx set cbsize=0|1|2 cbmode=0|1|2|3|4|7
storcli /cx/vx set wrcache=WT|WB|AWB
storcli /cx/vx set rdcache=RA|NoRA
storcli /cx/vx set iopolicy=Cached|Direct
storcli /cx/vx set accesspolicy=RW|RO|Blocked|RmvBlkd
storcli /cx/vx set pdcache=On|Off|Default
storcli /cx/vx set name=<NameString>
storcli /cx/vx set HostAccess=ExclusiveAccess|SharedAccess
storcli /cx/vx set ds=Default|Auto|None|Max|MaxNoCache
storcli /cx/vx set autobgi=On|Off
storcli /cx/vx set pi=Off
storcli /cx/vx show
storcli /cx/vx show all [logfile[=filename]]
storcli /cx/vx show init
storcli /cx/vx show cc
storcli /cx/vx show erase
storcli /cx/vx show migrate
storcli /cx/vx show bgi
storcli /cx/vx show autobgi
storcli /cx/vx show trim
storcli /cx set consistencycheck|cc=[off|seq|conc] [delay=value]
        starttime=yyyy/mm/dd hh] [excludevd=x-y,z|none]
storcli /cx show cc|consistencycheck
storcli /cx show ocr
storcli /cx set ocr=<on|off>
storcli /cx show sesmultipathcfg
storcli /cx set sesmultipathcfg=<on|off>
storcli /cx/vx start init[Full][Force]
storcli /cx/vx start erase [simple|normal|thorough|standard][patternA=<val>]
[patternB=<val>]
storcli /cx/vx start cc[Force]
storcli /cx/vx start migrate type=raidx [option=add|remove
        drives=[e:]s|[e:]s-x|[e:]s-x,y] [Force]
storcli /cx/vx stop init
storcli /cx/vx stop erase
storcli /cx/vx stop cc
storcli /cx/vx stop bgi
storcli /cx/vx pause cc
storcli /cx/vx pause bgi
storcli /cx/vx resume cc
storcli /cx/vx resume bgi
storcli /cx show
storcli /cx show all [logfile[=filename]]
storcli /cx show preservedcache
storcli /cx/vx delete preservedcache[force]
storcli /cx[/ex]/sx download src=<filepath> [satabridge] [mode= 5|7] [parallel] [force]
storcli /cx[/ex]/sx download status
storcli /cx/ex download src=<filepath> [forceActivate]
storcli /cx[/ex]/sx download src=<filepath> mode= E offline [activatenow] [delay=<val>]
storcli /cx[/ex]/sx download  mode= F offline [delay=<val>]
storcli /cx[/ex]/sx secureerase [force]
storcli /cx[/ex]/sx start erase [simple| normal| thorough | standard| threepass | crypto]
  [patternA=<val>] [patternB=<val>]
storcli /cx[/ex]/sx stop erase
storcli /cx[/ex]/sx show erase
storcli /cx[/ex]/sx show rawdata pageaddr=<pageaddress in hex> file=<filename>
storcli /cx[/ex]/sx set bootdrive=<on|off>
storcli /cx/vx set bootdrive=<on|off>
storcli /cx show bootdrive
storcli /cx show bootwithpinnedcache
storcli /cx set bootwithpinnedcache=<on|off>
storcli /cx show activityforlocate
storcli /cx set activityforlocate=<on|off>
storcli /cx show copyback
storcli /cx set copyback=<on|off> type=smartssd|smarthdd|all
storcli /cx show jbod
storcli /cx set jbod=<on|off> [force]
storcli /cx set autorebuild=<on|off>
storcli /cx set ldlimit=<default|max>
storcli /cx show autorebuild
storcli /cx set autoconfig=<off|[on|sscr0]|r0|wbr0> [immediate]
storcli /cx show autoconfig
storcli /cx show cachebypass
storcli /cx set cachebypass=<on|off>
storcli /cx show usefdeonlyencrypt
storcli /cx set usefdeonlyencrypt=<on|off>
storcli /cx show prcorrectunconfiguredareas
storcli /cx set prcorrectunconfiguredareas=<on|off>
storcli /cx show batterywarning
storcli /cx set batterywarning=<on|off>
storcli /cx show abortcconerror
storcli /cx set abortcconerror=<on|off>
storcli /cx show ncq
storcli /cx show configautobalance
storcli /cx set ncq=<on|off>
storcli /cx set configautobalance=<on|off>
storcli /cx show maintainpdfailhistory
storcli /cx set maintainpdfailhistory=<on|off>
storcli /cx show restorehotspare
storcli /cx set restorehotspare=<on|off>
storcli /cx set bios [state=<on|off>] [Mode=<SOE|PE|IE|SME>] [abs=<on|off>]
      [DeviceExposure=<value>]
storcli /cx show bios
storcli /cx show alarm
storcli /cx set alarm=<on|off|silence>
storcli /cx show foreignautoimport
storcli /cx set foreignautoimport=<on|off>
storcli /cx show directpdmapping
storcli /cx set directpdmapping=<on|off>
storcli /cx show rebuildrate
storcli /cx set rebuildrate=<value>
storcli /cx show loadbalancemode
storcli /cx set loadbalancemode=<on|off>
storcli /cx show eghs
storcli /cx set eghs [state=<on|off>] [eug=<on|off>] [smarter=<on|off>]
storcli /cx show cacheflushint
storcli /cx set cacheflushint=<value>
storcli /cx show prrate
storcli /cx set prrate=<value>
storcli /cx show ccrate
storcli /cx set ccrate=<value>
storcli /cx show bgirate
storcli /cx set bgirate =<value>
storcli /cx show dpm
storcli /cx set dpm =<on|off>
storcli /cx show sgpioforce
storcli /cx set sgpioforce =<on|off>
storcli /cx set supportssdpatrolread =<on|off>
storcli /cx show migraterate
storcli /cx set migraterate=<value>
storcli /cx show spinupdrivecount
storcli /cx show wbsupport
storcli /cx set spinupdrivecount=<value>
storcli /cx show spinupdelay
storcli /cx set spinupdelay=<value>
storcli /cx show coercion
storcli /cx set coercion=<value>
storcli /cx show limitMaxRateSATA
storcli /cx set limitMaxRateSATA=on|off
storcli /cx show HDDThermalPollInterval
storcli /cx set HDDThermalPollInterval=<value>
storcli /cx show SSDThermalPollInterval
storcli /cx set SSDThermalPollInterval=<value>
storcli /cx show smartpollinterval
storcli /cx set smartpollinterval=<value>
storcli /cx show eccbucketsize
storcli /cx set eccbucketsize=<value>
storcli /cx show eccbucketleakrate
storcli /cx set eccbucketleakrate=<value>
storcli /cx show backplane
storcli /cx set backplane mode=<value> expose=<on/off>
storcli /cx show perfmode
storcli /cx set perfmode=<value> [maxflushlines=<value> numiostoorder=<value>]
storcli /cx show perfmodevalues
storcli /cx show pi
storcli /cx set pi [state=<on|off>] [import=<on|off>]
storcli /cx show time
storcli /cx set time=<yyyymmdd hh:mm:ss | systemtime>
storcli /cx show ds
storcli /cx set ds=OFF type=1|2|3|4
storcli /cx set ds=ON type=1|2 [properties]
storcli /cx set ds=ON type=3|4 DefaultLdType=<val> [properties]
storcli /cx set ds [properties]
storcli /cx show safeid
storcli /cx show rehostinfo
storcli /cx show pci
storcli /cx show ASO
storcli /cx set aso key=<key value> preview
storcli /cx set aso key=<key value>
storcli /cx set aso transfertovault
storcli /cx set aso rehostcomplete
storcli /cx set aso deactivatetrialkey
storcli /cx set factory defaults
storcli /cx download file=<filepath> [fwtype=<val>] [ResetNow] [nosigchk]
        [noverchk] [force]
storcli /cx flush|flushcache
storcli /cx [start] flush|flushcache [cachecade | nytrocache | ALL]
storcli /cx stop flush|flushcache cachecade|nytrocache
storcli /cx show flush|flushcache cachecade|nytrocache
storcli /cx/px show
storcli /cx/px show all
storcli /cx/px set linkspeed=0|1.5|3|6|12
storcli /cx/bbu show
storcli /cx/bbu show all
storcli /cx/bbu show status
storcli /cx/bbu show properties
storcli /cx/bbu show learn
storcli /cx/bbu show gasgauge Offset=xxxx Numbytes=n
storcli /cx/bbu start learn
storcli /cx/bbu show modes
storcli /cx/bbu set [ learnDelayInterval=<val> | bbuMode=<val>
        |learnStartTime=[DDD HH | off] | autolearnmode=<val> |
        powermode=sleep | writeaccess=sealed ]
storcli /cx/cv set SCAPVPD file=<input file path> VPDPage=<SCapVPDFixed>
storcli /cx/cv show
storcli /cx/cv show all
storcli /cx/cv show status
storcli /cx/cv show learn
storcli /cx/cv show SCAPVPD file=<output file path> VPDPage=<SCapVPDFixed>
storcli /cx/cv start learn
storcli /cx show securitykey keyid
storcli /cx start patrolread
storcli /cx stop patrolread
storcli /cx pause patrolread
storcli /cx resume patrolread
storcli /cx show patrolRead
storcli /cx show powermonitoringinfo
storcli /cx show ldlimit
storcli /cx set patrolread = {{on mode=<auto|manual> }|{off}}
storcli /cx set patrolread [starttime=< yyyy/mm/dd hh>]
        [maxconcurrentpd =<value>] [includessds=<on|onlymixed|off>]
        [uncfgareas=on|off]
storcli /cx set patrolread delay = <value>
storcli /cx[/ex]/sx show diag paniclog [Query] | [ExtractSlot=x]
                                        | [EraseSlot=x] [file=filepath]
storcli /cx[/ex]/sx show diag smartlog [file=filepath]
storcli /cx[/ex]/sx show diag errorlog [file=filepath]
storcli /cx del Nytrocache [force]
storcli /cx show badblocks
storcli /cx flasherase
storcli /cx shutdown
storcli /cx/mx set mode=<Internal | External | Auto>
storcli /cx/mx show
storcli /cx transform iMR
storcli /cx restart
storcli /cx/vx show BBMT
storcli /cx/vx delete BBMT
storcli /cx[/ex]/sx start format [thorough]
storcli /cx show dequeuelog file=<filepath>
storcli /cx show maintenance
storcli /cx set maintenance mode=normal|nodevices
storcli /cx show personality
storcli /cx set personality=RAID|HBA|JBOD
storcli /cx set personality behavior=JBOD|None
storcli /cx show jbodwritecache
storcli /cx set jbodwritecache=on|off|default
storcli /cx show immediateio
storcli /cx show driveactivityled
storcli /cx set immediateio=<on|off>
storcli /cx show largeiosupport
storcli /cx set largeiosupport=<on|off>
storcli /cx set driveactivityled=<on|off>
storcli /cx show pdfailevents [lastoneday] [lastseqnum=<val>] [file=<filepath>]
storcli /cx show pdfaileventoptions
storcli /cx set pdfaileventoptions [detectionType=<val>] [correctiveaction=<val>] [errorThreshold=<val>]
storcli /cx/vx show vfmap
storcli /cx/vx set vfmap [VF=<val> | PF] access=RW|RO|Blocked|Hidden
storcli /cx show AliLog [logfile[=filename]]
storcli /cx get config file=<fileName>
storcli /cx set config file=<fileName>
storcli /cx get FRU
storcli /cx set FRU
storcli delete FRU file=<fileName>
storcli show FRU
storcli /cx show flushwriteverify
storcli /cx set flushwriteverify=<on|off>
storcli /cx/dx set transport=on/off [EDHSP=on/off] [SDHSP=on/off]
storcli /cx show largeQD
storcli /cx set largeQD=<on|off>
storcli /cx set debug type=<value> option=<value> [level=<value in hex>]
storcli /cx set debug reset all
storcli /cx set personality behavior [sesmgmt=on/off] [securesed=on/off]
          [multipath=on/off] [multiinit=on/off]
storcli /cx show sriov
storcli /cx show VFQDMode
storcli /cx show QueueDepth VF=<val>
storcli /cx set sriov=on/off
storcli /cx set VFQDMode=<val>
storcli /cx set QueueDepth VF=<val> QDValue=<val>
storcli /cx delete config [force]
storcli /cx/jbodx del [discardcache] [force]
storcli /cx/jbodx show
storcli /cx/jbodx show init
storcli /cx/jbodx show erase
storcli /cx/jbodx start init[Full][Force]
storcli /cx/jbodx start erase [simple|normal|thorough|standard][patternA=<val>]
[patternB=<val>]
storcli /cx/jbodx stop init
storcli /cx/jbodx stop erase
storcli /cx/jbodx set bootdrive=<on|off>
 
 
Note:Use 'page=[x]'as the last option in all the commands to set the page break.
      X=lines per page. E.g. 'storcli help page=10'
 
***
***
*** 01/26/2024 10:34:58: storcli show all (display all Megaraid controller configuration overview)
***
Status Code = 0
Status = Success
Description = None
 
Number of Controllers = 1
Host Name = wort.lan.kitsnet.us
Operating System  = Linux4.18.0-477.27.1.el8_8.x86_64
 
System Overview :
===============
 
----------------------------------------------------------------------------------
Ctl Model                Ports PDs DGs DNOpt VDs VNOpt BBU sPR DS  EHS ASOs Hlth
----------------------------------------------------------------------------------
  0 LSIMegaRAIDSAS9260-8i    8  8  4    0  4    0 Opt On  1&2 Y      4 Opt
----------------------------------------------------------------------------------
 
Ctl=Controller Index|DGs=Drive groups|VDs=Virtual drives|Fld=Failed
PDs=Physical drives|DNOpt=DG NotOptimal|VNOpt=VD NotOptimal|Opt=Optimal
Msng=Missing|Dgd=Degraded|NdAtn=Need Attention|Unkwn=Unknown
sPR=Scheduled Patrol Read|DS=DimmerSwitch|EHS=Emergency Hot Spare
Y=Yes|N=No|ASOs=Advanced Software Options|BBU=Battery backup unit
Hlth=Health|Safe=Safe-mode boot
 
 
ASO :
===
 
----------------------------------------------------
Ctl Cl SAS MD R6 WC R5 SS FP Re CR RF CO CW HA SSHA
----------------------------------------------------
  0 U  U  X  U  U  U  X  U  X  U  X  X  U  X  X
----------------------------------------------------
 
Cl=Cluster|MD=Max Disks|WC=Wide Cache|SS=Safe Store|FP=Fast Path|Re=Recovery
CR=CacheCade(Read)|RF=Reduced Feature Set|CO=Cache Offload
CW=CacheCade(Read/Write)|X=Not Available/Not Installed|U=Unlimited|T=Trial
|HA=High Availability |SSHA=Single server High Availability
 
 
***
***
*** 01/26/2024 10:34:59: storcli /c0 show freespace (show free space in controller)
***
Controller = 0
Status = Success
Description = None
 
 
FREE SPACE DETAILS :
==================
 
Total Slot Count = 0
ID-Index|DG-Drive Group|AftrVD-Identify Freespace After VD
 
 
 
***
***
*** 01/26/2024 10:34:59: storcli /c0 show all (show controller properties)
***
Generating detailed summary of the adapter, it may take a while to complete.
 
Controller = 0
Status = Success
Description = None
 
 
Basics :
======
Controller = 0
Model = LSI MegaRAID SAS 9260-8i
Serial Number = SV21925471
Current Controller Date/Time = 01/26/2024, 10:34:20
Current System Date/time = 01/26/2024, 10:34:59
SAS Address = 500605b004a580b0
PCI Address = 00:0f:00:00
Mfg Date = 05/12/12
Rework Date = 00/00/00
Revision No = 82A
 
 
Version :
=======
Firmware Package Build = 12.15.0-0239
Firmware Version = 2.130.403-4660
Bios Version = 3.30.02.2_4.16.08.00_0x06060A05
Preboot CLI Version = 04.04-020:#%00009
WebBIOS Version = 6.0-54-e_50-Rel
NVDATA Version = 2.09.03-0058
Boot Block Version = 2.02.00.00-0000
Bootloader Version = 09.250.01.219
Driver Name = megaraid_sas
Driver Version = 07.719.03.00-rh1
 
 
Bus :
===
Vendor Id = 0x1000
Device Id = 0x79
SubVendor Id = 0x1000
SubDevice Id = 0x9261
Host Interface = PCI-E
Device Interface = SAS-6G
Bus Number = 15
Device Number = 0
Function Number = 0
 
 
Pending Images in Flash :
=======================
Image name = No pending images
 
 
Status :
======
Controller Status = Optimal
Memory Correctable Errors = 0
Memory Uncorrectable Errors = 0
ECC Bucket Count = 0
Any Offline VD Cache Preserved = No
BBU Status = 0
Support PD Firmware Download = No
Lock Key Assigned = No
Failed to get lock key on bootup = No
Lock key has not been backed up = No
Bios was not detected during boot = No
Controller must be rebooted to complete security operation = No
A rollback operation is in progress = No
At least one PFK exists in NVRAM = No
SSC Policy is WB = Yes
Controller has booted into safe mode = No
 
 
Supported Adapter Operations :
============================
Rebuild Rate = Yes
CC Rate = Yes
BGI Rate  = Yes
Reconstruct Rate = Yes
Patrol Read Rate = Yes
Alarm Control = Yes
Cluster Support = Yes
BBU  = Yes
Spanning = Yes
Dedicated Hot Spare = Yes
Revertible Hot Spares = Yes
Foreign Config Import = Yes
Self Diagnostic = Yes
Allow Mixed Redundancy on Array = No
Global Hot Spares = Yes
Deny SCSI Passthrough = No
Deny SMP Passthrough = No
Deny STP Passthrough = No
Support more than 8 Phys = Yes
FW and Event Time in GMT = No
Support Enhanced Foreign Import = Yes
Support Enclosure Enumeration = Yes
Support Allowed Operations = Yes
Abort CC on Error = Yes
Support Multipath = Yes
Support Odd & Even Drive count in RAID1E = No
Support Security = No
Support Config Page Model = Yes
Support the OCE without adding drives = Yes
Support EKM = No
Snapshot Enabled = No
Support PFK = Yes
Support PI = No
Support Ld BBM Info = No
Support Shield State = No
Block SSD Write Disk Cache Change = No
Support Suspend Resume BG ops = No
Support Emergency Spares = Yes
Support Set Link Speed = No
Support Boot Time PFK Change = No
Support JBOD = No
Disable Online PFK Change = No
Support Perf Tuning = No
Support SSD PatrolRead = Yes
Real Time Scheduler = Yes
Support Reset Now = Yes
Support Emulated Drives = Yes
Headless Mode = Yes
Dedicated HotSpares Limited = No
Point In Time Progress = No
Extended LD = No
Boot Volume Supported = No
Support Uneven span  = No
Support Config Auto Balance = No
Support Maintenance Mode = No
Support Diagnostic results = No
Support Ext Enclosure = No
Support Sesmonitoring = No
Support SecurityonJBOD = No
Support ForceFlash = No
Support DisableImmediateIO = Yes
Support LargeIOSupport = No
Support DrvActivityLEDSetting = Yes
Support FlushWriteVerify = No
Support CPLDUpdate = No
Support ForceTo512e = No
Support discardCacheDuringLDDelete = No
Support JBOD Write cache = No
Support Large QD Support = No
Support SRIOV Options = No
 
 
Supported PD Operations :
=======================
Force Online = Yes
Force Offline = Yes
Force Rebuild = Yes
Deny Force Failed = No
Deny Force Good/Bad = No
Deny Missing Replace = No
Deny Clear = No
Deny Locate = No
Support Power State = Yes
Set Power State For Cfg = No
Support T10 Power State = No
Support Temperature = Yes
NCQ = No
Support Max Rate SATA = No
Support Degraded Media = No
Support Parallel FW Update = No
Support Drive Crypto Erase = No
 
 
Supported VD Operations :
=======================
Read Policy = Yes
Write Policy = Yes
IO Policy = Yes
Access Policy = Yes
Disk Cache Policy = Yes
Reconstruction = Yes
Deny Locate = No
Deny CC = No
Allow Ctrl Encryption = No
Enable LDBBM = Yes
Support FastPath = Yes
Performance Metrics = Yes
Power Savings = No
Support Powersave Max With Cache = No
Support Breakmirror = No
Support SSC WriteBack = Yes
Support SSC Association = Yes
Support VD Hide = No
Support VD Cachebypass = No
Support VD discardCacheDuringLDDelete = No
 
 
Advanced Software Option :
========================
 
--------------------------------------------------------------
Adv S/W Opt                Time Remaining  Mode
--------------------------------------------------------------
MegaRAID FastPath          Unlimited      Secured
MegaRAID CacheCade Pro 2.0  Unlimited      Secured
MegaRAID RAID6              Unlimited      Factory Installed
MegaRAID RAID5              Unlimited      Secured
--------------------------------------------------------------
 
Safe ID =  6R55EDP8XH5F2UIQ1F24M1BBARNIQTI86SKRK52Z
 
HwCfg :
=====
ChipRevision =  B4
BatteryFRU = N/A
Front End Port Count = 0
Backend Port Count = 8
BBU = Present
Alarm = On
Serial Debugger = Present
NVRAM Size = 32KB
Flash Size = 8MB
On Board Memory Size = 512MB
CacheVault Flash Size = NA
TPM = Absent
Upgrade Key = Present
On Board Expander = Absent
Temperature Sensor for ROC = Absent
Temperature Sensor for Controller = Absent
Upgradable CPLD = Absent
Current Size of CacheCade (GB) = 223
Current Size of FW Cache (MB) = 346
 
 
Policies :
========
 
Policies Table :
==============
 
------------------------------------------------
Policy                          Current Default
------------------------------------------------
Predictive Fail Poll Interval  300 sec
Interrupt Throttle Active Count 16
Interrupt Throttle Completion  50 us
Rebuild Rate                    30 %    30%
PR Rate                        30 %    30%
BGI Rate                        30 %    30%
Check Consistency Rate          30 %    30%
Reconstruction Rate            30 %    30%
Cache Flush Interval            4s
------------------------------------------------
 
Flush Time(Default) = 4s
Drive Coercion Mode = none
Auto Rebuild = Off
Battery Warning = On
ECC Bucket Size = 15
ECC Bucket Leak Rate (hrs) = 24
Restore HotSpare on Insertion = Off
Expose Enclosure Devices = On
Maintain PD Fail History = On
Reorder Host Requests = On
Auto detect BackPlane = SGPIO/i2c SEP
Load Balance Mode = Auto
Security Key Assigned = Off
Disable Online Controller Reset = Off
Use drive activity for locate = Off
 
 
Boot :
====
BIOS Enumerate VDs = 1
Stop BIOS on Error = Off
Delay during POST = 0
Spin Down Mode = None
Enable Ctrl-R = No
Enable Web BIOS = Yes
Enable PreBoot CLI = Yes
Enable BIOS = Yes
Max Drives to Spinup at One Time = 4
Maximum number of direct attached drives to spin up in 1 min = 120
Delay Among Spinup Groups (sec) = 2
Allow Boot with Preserved Cache = Off
 
 
High Availability :
=================
Topology Type = None
Cluster Permitted = Yes
Cluster Active = No
 
 
Defaults :
========
Phy Polarity = 0
Phy PolaritySplit = 0
Strip Size = 256 KB
Write Policy = WB
Read Policy = RA
Cache When BBU Bad = Off
Cached IO = Off
VD PowerSave Policy = Controller Defined
Default spin down time (mins) = 30
Coercion Mode = None
ZCR Config = Unknown
Max Chained Enclosures = 16
Direct PD Mapping = No
Restore Hot Spare on Insertion = No
Expose Enclosure Devices = Yes
Maintain PD Fail History = Yes
Zero Based Enclosure Enumeration = No
Disable Puncturing = No
EnableLDBBM = Yes
DisableHII = No
Un-Certified Hard Disk Drives = Allow
SMART Mode = Mode 6
Enable LED Header = Yes
LED Show Drive Activity = Yes
Dirty LED Shows Drive Activity = No
EnableCrashDump = No
Disable Online Controller Reset = No
Treat Single span R1E as R10 = No
Power Saving option = Enabled
TTY Log In Flash = No
Auto Enhanced Import = Yes
BreakMirror RAID Support = Yes
Disable Join Mirror = No
Enable Shield State = No
Time taken to detect CME = 60 sec
 
 
Capabilities :
============
Supported Drives = SAS, SATA
Boot Volume Supported = NO
RAID Level Supported = RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50,
RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported,
PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
Enable JBOD = No
Mix in Enclosure = Allowed
Mix of SAS/SATA of HDD type in VD = Allowed
Mix of SAS/SATA of SSD type in VD = Allowed
Mix of SSD/HDD in VD = Allowed
SAS Disable = No
Max Arms Per VD = 32
Max Spans Per VD = 8
Max Arrays = 128
Max VD per array = 16
Max Number of VDs = 64
Max Parallel Commands = 1008
Max SGE Count = 60
Max Data Transfer Size = 8192 sectors
Max Strips PerIO = 42
Max Configurable CacheCade Size(GB) = 512
Max Transportable DGs = 0
Min Strip Size = 8 KB
Max Strip Size = 1.0 MB
 
 
Scheduled Tasks :
===============
Consistency Check Reoccurrence = 168 hrs
Next Consistency check launch = 01/31/2024, 23:00:00
Patrol Read Reoccurrence = 168 hrs
Next Patrol Read launch = 01/31/2024, 23:00:00
Battery learn Reoccurrence = 672 hrs
Next Battery Learn = 02/07/2024, 12:00:00
OEMID = LSI
 
Drive Groups = 4
 
TOPOLOGY :
========
 
-----------------------------------------------------------------------------
DG Arr Row EID:Slot DID Type  State BT      Size PDC  PI SED DS3  FSpace TR
-----------------------------------------------------------------------------
0 -  -  -        -  RAID5 Optl  N    7.276 TB enbl N  N  none N      N
0 0  -  -        -  RAID5 Optl  N    7.276 TB enbl N  N  none N      N
0 0  0  252:1    14  DRIVE Onln  N    3.637 TB enbl N  N  none -      N
0 0  1  252:5    12  DRIVE Onln  N    3.637 TB enbl N  N  none -      N
0 0  2  252:0    11  DRIVE Onln  N    3.637 TB enbl N  N  none -      N
1 -  -  -        -  RAID1 Optl  N    2.728 TB enbl N  N  none N      N
1 0  -  -        -  RAID1 Optl  N    2.728 TB enbl N  N  none N      N
1 0  0  252:6    16  DRIVE Onln  N    2.728 TB enbl N  N  none -      N
1 0  1  252:2    13  DRIVE Onln  N    2.728 TB enbl N  N  none -      N
2 -  -  -        -  RAID1 Optl  N    1.818 TB enbl N  N  none N      N
2 0  -  -        -  RAID1 Optl  N    1.818 TB enbl N  N  none N      N
2 0  0  252:7    15  DRIVE Onln  N    1.818 TB enbl N  N  none -      N
2 0  1  252:3    9  DRIVE Onln  N    1.818 TB enbl N  N  none -      N
3 -  -  -        -  Cac0  Optl  N  223.062 GB dflt N  N  none N      N
3 0  -  -        -  RAID0 Optl  N  223.062 GB dflt N  N  none N      N
3 0  0  252:4    10  DRIVE Onln  N  223.062 GB dflt N  N  none -      N
-----------------------------------------------------------------------------
 
DG=Disk Group Index|Arr=Array Index|Row=Row Index|EID=Enclosure Device ID
DID=Device ID|Type=Drive Type|Onln=Online|Rbld=Rebuild|Dgrd=Degraded
Pdgd=Partially degraded|Offln=Offline|BT=Background Task Active
PDC=PD Cache|PI=Protection Info|SED=Self Encrypting Drive|Frgn=Foreign
DS3=Dimmer Switch 3|dflt=Default|Msng=Missing|FSpace=Free Space Present
TR=Transport Ready
 
Virtual Drives = 4
 
VD LIST :
=======
 
---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC      Size Name
---------------------------------------------------------------
0/0  RAID5 Optl  RW    Yes    RWBC  -  ON    7.276 TB
1/2  RAID1 Optl  RW    Yes    RWBC  RW  ON    2.728 TB
2/3  RAID1 Optl  RW    Yes    RWBC  RW  ON    1.818 TB
3/1  Cac0  Optl  RW    Yes    RWBD  -  ON  223.062 GB
---------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
Physical Drives = 8
 
PD LIST :
=======
 
----------------------------------------------------------------------------------
EID:Slt DID State DG      Size Intf Med SED PI SeSz Model                Sp Type
----------------------------------------------------------------------------------
252:0    11 Onln  0  3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
252:1    14 Onln  0  3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
252:2    13 Onln  1  2.728 TB SATA HDD N  N  512B WDC WD30EFRX-68AX9N0 U  -
252:3    9 Onln  2  1.818 TB SATA HDD N  N  512B ST2000DX001-1NS164  U  -
252:4    10 Onln  3 223.062 GB SATA SSD N  N  512B SanDisk SDSSDXPS240G U  -
252:5    12 Onln  0  3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
252:6    16 Onln  1  2.728 TB SATA HDD N  N  512B WDC WD30EFRX-68AX9N0 U  -
252:7    15 Onln  2  1.818 TB SATA HDD N  N  512B ST2000DX001-1NS164  U  -
----------------------------------------------------------------------------------
 
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded
 
 
BBU_Info :
========
 
-----------------------------------------------------------------------
Model  State  RetentionTime Temp Mode MfgDate    Next Learn
-----------------------------------------------------------------------
iBBU08 Optimal 48 hours +    37C  5    2019/02/15 2024/02/07  12:00:00
-----------------------------------------------------------------------
 
Mode 5: 48+ Hrs retention with a non-transparent learn cycle
          and moderate service life.
 
***
***
*** 01/26/2024 10:35:05: storcli /c0/dall show all (list all physical disks)
***
Controller = 0
Status = Success
Description = Show Diskgroup Succeeded
 
 
TOPOLOGY :
========
 
-----------------------------------------------------------------------------
DG Arr Row EID:Slot DID Type  State BT      Size PDC  PI SED DS3  FSpace TR
-----------------------------------------------------------------------------
0 -  -  -        -  RAID5 Optl  N    7.276 TB enbl N  N  none N      N
0 0  -  -        -  RAID5 Optl  N    7.276 TB enbl N  N  none N      N
0 0  0  252:1    14  DRIVE Onln  N    3.637 TB enbl N  N  none -      N
0 0  1  252:5    12  DRIVE Onln  N    3.637 TB enbl N  N  none -      N
0 0  2  252:0    11  DRIVE Onln  N    3.637 TB enbl N  N  none -      N
1 -  -  -        -  RAID1 Optl  N    2.728 TB enbl N  N  none N      N
1 0  -  -        -  RAID1 Optl  N    2.728 TB enbl N  N  none N      N
1 0  0  252:6    16  DRIVE Onln  N    2.728 TB enbl N  N  none -      N
1 0  1  252:2    13  DRIVE Onln  N    2.728 TB enbl N  N  none -      N
2 -  -  -        -  RAID1 Optl  N    1.818 TB enbl N  N  none N      N
2 0  -  -        -  RAID1 Optl  N    1.818 TB enbl N  N  none N      N
2 0  0  252:7    15  DRIVE Onln  N    1.818 TB enbl N  N  none -      N
2 0  1  252:3    9  DRIVE Onln  N    1.818 TB enbl N  N  none -      N
3 -  -  -        -  Cac0  Optl  N  223.062 GB dflt N  N  none N      N
3 0  -  -        -  RAID0 Optl  N  223.062 GB dflt N  N  none N      N
3 0  0  252:4    10  DRIVE Onln  N  223.062 GB dflt N  N  none -      N
-----------------------------------------------------------------------------
 
DG=Disk Group Index|Arr=Array Index|Row=Row Index|EID=Enclosure Device ID
DID=Device ID|Type=Drive Type|Onln=Online|Rbld=Rebuild|Dgrd=Degraded
Pdgd=Partially degraded|Offln=Offline|BT=Background Task Active
PDC=PD Cache|PI=Protection Info|SED=Self Encrypting Drive|Frgn=Foreign
DS3=Dimmer Switch 3|dflt=Default|Msng=Missing|FSpace=Free Space Present
TR=Transport Ready
 
 
VD LIST :
=======
 
---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC      Size Name
---------------------------------------------------------------
0/0  RAID5 Optl  RW    Yes    RWBC  -  ON    7.276 TB
1/2  RAID1 Optl  RW    Yes    RWBC  RW  ON    2.728 TB
2/3  RAID1 Optl  RW    Yes    RWBC  RW  ON    1.818 TB
3/1  Cac0  Optl  RW    Yes    RWBD  -  ON  223.062 GB
---------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
Total VD Count = 4
 
DG Drive LIST :
=============
 
----------------------------------------------------------------------------------
EID:Slt DID State DG      Size Intf Med SED PI SeSz Model                Sp Type
----------------------------------------------------------------------------------
252:1    14 Onln  0  3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
252:5    12 Onln  0  3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
252:0    11 Onln  0  3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
252:6    16 Onln  1  2.728 TB SATA HDD N  N  512B WDC WD30EFRX-68AX9N0 U  -
252:2    13 Onln  1  2.728 TB SATA HDD N  N  512B WDC WD30EFRX-68AX9N0 U  -
252:7    15 Onln  2  1.818 TB SATA HDD N  N  512B ST2000DX001-1NS164  U  -
252:3    9 Onln  2  1.818 TB SATA HDD N  N  512B ST2000DX001-1NS164  U  -
252:4    10 Onln  3 223.062 GB SATA SSD N  N  512B SanDisk SDSSDXPS240G U  -
----------------------------------------------------------------------------------
 
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded
 
Total Drive Count = 8
 
 
***
***
*** 01/26/2024 10:35:05: storcli /c0/vall show (list all virtual drives)
***
Controller = 0
Status = Success
Description = None
 
 
Virtual Drives :
==============
 
---------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC      Size Name
---------------------------------------------------------------
0/0  RAID5 Optl  RW    Yes    RWBC  -  ON    7.276 TB
3/1  Cac0  Optl  RW    Yes    RWBD  -  ON  223.062 GB
1/2  RAID1 Optl  RW    Yes    RWBC  RW  ON    2.728 TB
2/3  RAID1 Optl  RW    Yes    RWBC  RW  ON    1.818 TB
---------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
 
***
***
*** 01/26/2024 10:35:05: storcli /c0/vall show (list all virtual drive info)
***
Controller = 0
Status = Success
Description = None
 
 
/c0/v0 :
======
 
-------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC    Size Name
-------------------------------------------------------------
0/0  RAID5 Optl  RW    Yes    RWBC  -  ON  7.276 TB
-------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
 
PDs for VD 0 :
============
 
--------------------------------------------------------------------------------
EID:Slt DID State DG    Size Intf Med SED PI SeSz Model                Sp Type
--------------------------------------------------------------------------------
252:1    14 Onln  0 3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
252:5    12 Onln  0 3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
252:0    11 Onln  0 3.637 TB SATA HDD N  N  512B WDC WD40EFRX-68N32N0 U  -
--------------------------------------------------------------------------------
 
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded
 
 
VD0 Properties :
==============
Strip Size = 64 KB
Number of Blocks = 15625879552
VD has Emulated PD = Yes
Span Depth = 1
Number of Drives Per Span = 3
Write Cache(initial setting) = WriteBack
Disk Cache Policy = Enabled
Encryption = None
Data Protection = None
Active Operations = None
Exposed to OS = Yes
Creation Date = 13-10-2018
Creation Time = 09:49:02 PM
Emulation type = None
Is LD Ready for OS Requests = Yes
SCSI NAA Id = 600605b003ab8fa0235524ce5dca9751
 
 
/c0/v1 :
======
 
--------------------------------------------------------------
DG/VD TYPE State Access Consist Cache Cac sCC      Size Name
--------------------------------------------------------------
3/1  Cac0 Optl  RW    Yes    RWBD  -  ON  223.062 GB
--------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
 
PDs for VD 1 :
============
 
----------------------------------------------------------------------------------
EID:Slt DID State DG      Size Intf Med SED PI SeSz Model                Sp Type
----------------------------------------------------------------------------------
252:4    10 Onln  3 223.062 GB SATA SSD N  N  512B SanDisk SDSSDXPS240G U  -
----------------------------------------------------------------------------------
 
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded
 
 
VD1 Properties :
==============
Number of Blocks = 467795968
VD has Emulated PD = No
Span Depth = 1
Number of Drives Per Span = 1
Write Cache(initial setting) = WriteBack
Disk Cache Policy = Disk's Default
Encryption = None
Data Protection = None
Active Operations = None
Exposed to OS = No
Target ID of associated VDs = 2,3
Creation Date = 15-05-2019
Creation Time = 10:05:28 PM
Emulation type = default
Is LD Ready for OS Requests = Yes
SCSI NAA Id = 600605b003ab8fa0246f49a83f8a1f45
 
 
/c0/v2 :
======
 
-------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC    Size Name
-------------------------------------------------------------
1/2  RAID1 Optl  RW    Yes    RWBC  RW  ON  2.728 TB
-------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
 
PDs for VD 2 :
============
 
--------------------------------------------------------------------------------
EID:Slt DID State DG    Size Intf Med SED PI SeSz Model                Sp Type
--------------------------------------------------------------------------------
252:6    16 Onln  1 2.728 TB SATA HDD N  N  512B WDC WD30EFRX-68AX9N0 U  -
252:2    13 Onln  1 2.728 TB SATA HDD N  N  512B WDC WD30EFRX-68AX9N0 U  -
--------------------------------------------------------------------------------
 
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded
 
 
VD2 Properties :
==============
Strip Size = 64 KB
Number of Blocks = 5859442688
VD has Emulated PD = Yes
Span Depth = 1
Number of Drives Per Span = 2
Write Cache(initial setting) = WriteBack
Disk Cache Policy = Enabled
Encryption = None
Data Protection = None
Active Operations = None
Exposed to OS = Yes
Creation Date = 14-10-2018
Creation Time = 09:39:39 PM
Emulation type = None
Is LD Ready for OS Requests = Yes
SCSI NAA Id = 600605b003ab8fa02356741b5e0b91ba
 
 
/c0/v3 :
======
 
-------------------------------------------------------------
DG/VD TYPE  State Access Consist Cache Cac sCC    Size Name
-------------------------------------------------------------
2/3  RAID1 Optl  RW    Yes    RWBC  RW  ON  1.818 TB
-------------------------------------------------------------
 
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded
Optl=Optimal|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady|B=Blocked|
Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
Check Consistency
 
 
PDs for VD 3 :
============
 
------------------------------------------------------------------------------
EID:Slt DID State DG    Size Intf Med SED PI SeSz Model              Sp Type
------------------------------------------------------------------------------
252:7    15 Onln  2 1.818 TB SATA HDD N  N  512B ST2000DX001-1NS164 U  -
252:3    9 Onln  2 1.818 TB SATA HDD N  N  512B ST2000DX001-1NS164 U  -
------------------------------------------------------------------------------
 
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
CFShld-Configured shielded|Cpybck-CopyBack|CBShld-Copyback Shielded
 
 
VD3 Properties :
==============
Strip Size = 64 KB
Number of Blocks = 3905945600
VD has Emulated PD = Yes
Span Depth = 1
Number of Drives Per Span = 2
Write Cache(initial setting) = WriteBack
Disk Cache Policy = Enabled
Encryption = None
Data Protection = None
Active Operations = None
Exposed to OS = Yes
Creation Date = 14-10-2018
Creation Time = 10:25:38 PM
Emulation type = None
Is LD Ready for OS Requests = Yes
SCSI NAA Id = 600605b003ab8fa023567ee20c5b8925
 
 
***
***
*** 01/26/2024 10:35:05: storcli /c0/bbu show all (battery backup unit state)
***
Controller = 0
Status = Success
Description = None
 
 
BBU_Info :
========
 
----------------------------------------------------------------------
Property      Value
----------------------------------------------------------------------
Type          iBBU08
Voltage      3822 mV
Current      0 mA
Temperature  37 C
Battery State Optimal
Design Mode  5: 48+ Hrs retention with a non-transparent learn cycle
                and moderate service life.
----------------------------------------------------------------------
 
 
BBU_Firmware_Status :
===================
 
-------------------------------------------------
Property                                  Value
-------------------------------------------------
Charging Status                            None
Voltage                                    OK
Temperature                                OK
Learn Cycle Requested                      No
Learn Cycle Active                        No
Learn Cycle Status                        OK
Learn Cycle Timeout                        No
I2C Errors Detected                        No
Battery Pack Missing                      No
Replacement required                      No
Remaining Capacity Low                    No
Periodic Learn Required                    No
Transparent Learn                          No
No space to cache offload                  No
Pack is about to fail & should be replaced No
Cache Offload premium feature required    No
Module microcode update required          No
-------------------------------------------------
 
 
GasGaugeStatus :
==============
 
--------------------------------------
Property                  Value
--------------------------------------
GasGauge StatusCode        0x180
Fully Discharged          N/A
Fully Charged              N/A
Discharging                N/A
Initialized                N/A
Remaining Time Alarm      N/A
Terminate Discharge Alarm  N/A
Over Temperature          N/A
Charging Terminated        N/A
Over Charged              N/A
Relative State of Charge  58%
Charger System State      1
Charger System Ctrl        0
Charging current          0 mA
Absolute state of charge  55%
Max Error                  0%
Battery backup charge time 48 hours +
--------------------------------------
 
 
BBU_Capacity_Info :
=================
 
------------------------------------------------------
Property                Value
------------------------------------------------------
Relative State of Charge 58%
Absolute State of charge 55%
Remaining Capacity      828 mAh
Full Charge Capacity    1449 mAh
Run time to empty        Battery is not being charged
Average time to empty    99 min
Average Time to full    Battery is not being charged
Cycle Count              76
------------------------------------------------------
 
 
BBU_Design_Info :
===============
 
-----------------------------------
Property                Value
-----------------------------------
Date of Manufacture    15/02/2019
Design Capacity        1500 mAh
Design Voltage          4100 mV
Specification Info      0
Serial Number          4579
Pack Stat Configuration 0
Manufacture Name        LS36691
Device Name            bq27541
Device Chemistry        LION
Battery FRU            N/A
Transparent Learn      0
App Data                0
-----------------------------------
 
 
BBU_Properties :
==============
 
--------------------------------------------------------------
Property            Value
--------------------------------------------------------------
Auto Learn Period    28 days  (2419200 seconds)
Next Learn time      2024/02/07  12:00:00 (760622400 seconds)
Learn Delay Interval 0 hour(s)
Auto-Learn Mode      Enabled
BBU Mode            5
--------------------------------------------------------------
 
 
***
***
*** 01/26/2024 10:35:05: storcli /c0 show patrolRead (Patrol Read state)
***
Controller = 0
Status = Success
Description = None
 
 
Controller Properties :
=====================
 
---------------------------------------------
Ctrl_Prop              Value
---------------------------------------------
PR Mode                Auto
PR Execution Delay      168 hours
PR iterations completed 181
PR Next Start time      01/31/2024, 23:00:00
PR on SSD              Disabled
PR on EPD              Disabled
PR Current State        Stopped
---------------------------------------------
</syntaxhighlight>

Latest revision as of 17:41, 26 January 2024

The MegaRAID Storage Manager package provides GUI, SNMP and CLI management access to LSI RAID controllers including the 9260 8i used on wort. The Broadcom hosted MegaRAID SAS 9260-4i / 9260-8i / 9260DE-8i / 9261-8i downloads page includes a link to the official downloads page which in turn has a link to MegaRAID Storage Manager - Linux x64 (current version 17.05.06.00) A copy of this package has been downloaded and unpacked at http://wort/KitsNet/External_Packages/MR/MSM_linux_x64_installer-17.05.06-00.disk/

On the Broadcom site, the Latest SNMP Installers (version 17.05.02) is also available. These appear to have been installed on wort prior to its Rocky Linux incarnation

Retrieved from "https://wiki.kitsnet.us/w/index.php?title=KitsNet_Operations:External_Packages:Linux:MegaRAID_Storage_Manager&oldid=920"